#instamachinist

Tag posts on Instagram

I took this photo a few weeks ago before my customer came to pick this up to install it back in his excavator. I finally finished this overhaul of this hydraulic cylinder. It was the first cylinder I have completely done myself. I had help from a couple people, helping me find the seals etc. I had to machine a new rod, new rod eye, new rod eye bush, new pin, replace the transfer tube and socket weld fittings, repair the piston, all new seals, and hone the barrel. This is not my usual realm of work, but it was great to learn something new. #manuallathe #machinist #machining #manualmachinist #manualmachining #machineshop #manualmachineshop #machineshoplife #machineshopshit #instamachinist

I took this photo a few weeks ago before my customer came to pick this up to install it back in his excavator. I finally finished this overhaul of this hydraulic cylinder. It was the first cylinder I have completely done myself. I had help from a couple people, helping me find the seals etc. I had to machine a new rod, new rod eye, new rod eye bush, new pin, replace the transfer tube and socket weld fittings, repair the piston, all new seals, and hone the barrel. This is not my usual realm of work, but it was great to learn something new. #manuallathe #machinist #machining #manualmachinist #manualmachining #machineshop #manualmachineshop #machineshoplife #machineshopshit #instamachinist

Day 20 [ my controller is better ] of the @machinist_therapy_hotline photo a day challenge- this is an OSP300 controller on the Okuma LU45II-M , it’s way better than yours - fact.
#MTH2019 #bronzeisthenewgold #instamachinist

Day 20 [ my controller is better ] of the @machinist_therapy_hotline photo a day challenge- this is an OSP300 controller on the Okuma LU45II-M , it’s way better than yours - fact. #MTH2019 #bronzeisthenewgold #instamachinist

play_circle_filled#Repost @maschinenbaude (@get_repost)
・・・
Roboter sind überall. Hier ist ein Werbeclip, der unter Verwendung von Robotern von @universalrobots produziert wird 🤖. / Robots are everywhere. Here is an advertising clip which is produced in use of robots from @universalrobots 🤖.
-
Source: @stevegiralt
———————————————————-
You want to see more interesting videos
and pictures about engineering like this?
Join the engineering community, follow
@maschinenbaude and you will see a
new post about your passion everyday.
We are looking forward to see you! 💪🏼⚙️
———————————————————
🔗 All rights and credits reserved to the
respective owner(s).
———————————————————
#maschinenbau #mechanicalengineering
#engineering #manufacturing #metalwork
#innovation #turbine  #machinist #bionic
#engineer #machining #engine #invention
#forging #milling #instamachinist #gears
#assembly #schrauben #cnc #engineers
• #cncmachining #automation #turning •
🔧  #engineeringlife #maintenance 🔧
⚙️⚙️⚙️ #maschinenbaude ⚙️⚙️⚙️

#Repost @maschinenbaude (@get_repost) ・・・ Roboter sind überall. Hier ist ein Werbeclip, der unter Verwendung von Robotern von @universalrobots produziert wird 🤖. / Robots are everywhere. Here is an advertising clip which is produced in use of robots from @universalrobots 🤖. - Source: @stevegiralt ———————————————————- You want to see more interesting videos and pictures about engineering like this? Join the engineering community, follow @maschinenbaude and you will see a new post about your passion everyday. We are looking forward to see you! 💪🏼⚙️ ——————————————————— 🔗 All rights and credits reserved to the respective owner(s). ——————————————————— #maschinenbau #mechanicalengineering #engineering #manufacturing #metalwork #innovation #turbine #machinist #bionic #engineer #machining #engine #invention #forging #milling #instamachinist #gears #assembly #schrauben #cnc #engineers#cncmachining #automation #turning • 🔧 #engineeringlife #maintenance 🔧 ⚙️⚙️⚙️ #maschinenbaude ⚙️⚙️⚙️

Fresh machined parts all stacked up and ready to send off to get black anodize. #hellsgatehotrods #hghr #machining #customparts #production #machineshop #instamachinist #lidarusa #lidar

Fresh machined parts all stacked up and ready to send off to get black anodize. #hellsgatehotrods #hghr #machining #customparts #production #machineshop #instamachinist #lidarusa #lidar

photo_library✔️ Last one for this size (1.23")! Sign Up Sale: ZIRCONIUM Worry Coin - BUY 1, GET 2 (limited time only)⠀
.⠀
Simply comment "in" & ⠀
Choose #:⠀
1. Black Zirconium⠀
2. Honeycomb⠀
3. Polished⠀
⠀
.⠀
✔️ Zirconium 1.23" (3.12 cm) OD x 0.2" (0.51 cm) weight = 15.5g = 0.55oz⠀
.⠀
⠀
✔️✔️✔️✔️ $99.50 + $6 for shipping & PayPal (+ $10 International) ✔️✔️✔️✔️⠀
⠀
Thanks, Sean, Meton Boss⠀
.⠀
.⠀
.⠀
⠀
⠀
#worrycoin #worrystone #design #zirconium #metal #collectables #metalart #edc #everydaycarry #edcgear #edccommunity #pocketdump #pocketart #edctoys #edcgear #edccommunity #pocketdump #instamachinist #maker #madeintheusa #edcpocketdump #edesus #edcsale #dontworry #coin #pockettoy #usamade #madeinusa

✔️ Last one for this size (1.23")! Sign Up Sale: ZIRCONIUM Worry Coin - BUY 1, GET 2 (limited time only)⠀ .⠀ Simply comment "in" & ⠀ Choose #:⠀ 1. Black Zirconium⠀ 2. Honeycomb⠀ 3. Polished⠀ ⠀ .⠀ ✔️ Zirconium 1.23" (3.12 cm) OD x 0.2" (0.51 cm) weight = 15.5g = 0.55oz⠀ .⠀ ⠀ ✔️✔️✔️✔️ $99.50 + $6 for shipping & PayPal (+ $10 International) ✔️✔️✔️✔️⠀ ⠀ Thanks, Sean, Meton Boss⠀ .⠀ .⠀ .⠀ ⠀ ⠀ #worrycoin #worrystone #design #zirconium #metal #collectables #metalart #edc #everydaycarry #edcgear #edccommunity #pocketdump #pocketart #edctoys #edcgear #edccommunity #pocketdump #instamachinist #maker #madeintheusa #edcpocketdump #edesus #edcsale #dontworry #coin #pockettoy #usamade #madeinusa

Another day, another EJ head gasket job. We go back together with ARP head studs on any turbo application for the best assurance that it won't happen again.  It's cheap insurance and they are reuseable for any future build you may need. Buy them once and you're set! 

#Subaru #LS1 #LS3 #LSA #LS2 #Mitsubishi #4G63 #EJ255 #EJ257 #enginebuild #cylinders #engine #engineoverhaul #overhaul #motorhead #motor #machineshop #engineroom #machinist #machining #performanceengine #horsepower #instamachinist #enginerestoration #motormending #localbusiness⁣
#familyowned #kidfriendly #ARPfasteners

Another day, another EJ head gasket job. We go back together with ARP head studs on any turbo application for the best assurance that it won't happen again. It's cheap insurance and they are reuseable for any future build you may need. Buy them once and you're set!   #Subaru #LS1 #LS3 #LSA #LS2 #Mitsubishi #4G63 #EJ255 #EJ257 #enginebuild #cylinders #engine #engineoverhaul #overhaul #motorhead #motor #machineshop #engineroom #machinist #machining #performanceengine #horsepower #instamachinist #enginerestoration #motormending #localbusiness⁣ #familyowned #kidfriendly #ARPfasteners

photo_libraryFinished part from yesterday and todays big plate. Forgot to take a picture of how far I got on the plate, but that stringy chip is from the insert drill I used on it.

#cncmill #cncmachining #cncmilling #cadcam #haas #haasautomation #haascnc #instamachining #instamachinist #machineshop #machining  #machinist #autodesk #autodeskfusion360 #fusion360 #manufacturing

Finished part from yesterday and todays big plate. Forgot to take a picture of how far I got on the plate, but that stringy chip is from the insert drill I used on it. #cncmill #cncmachining #cncmilling #cadcam #haas #haasautomation #haascnc #instamachining #instamachinist #machineshop #machining  #machinist #autodesk #autodeskfusion360 #fusion360 #manufacturing

photo_libraryDay 20: my controller is better @machinist_therapy_hotline
#mth2019 .
Maybe not better, but definitely older 😢😥 the only sinumerik controllers I ever touch, glad that I don't work with them anymore 😏 .

#instamachinist #cnc #cncmill #kawasaki #kawasakirobotics #brotherspeedio #haas #design #tools #machine #shopfloor #machinistlife #machinist #metalwork #mechanic #metalworking #cncporn #lathechuck #boringbar #mazatrol #haas #haascnc #sinumerik

Day 20: my controller is better @machinist_therapy_hotline #mth2019 . Maybe not better, but definitely older 😢😥 the only sinumerik controllers I ever touch, glad that I don't work with them anymore 😏 . #instamachinist #cnc #cncmill #kawasaki #kawasakirobotics #brotherspeedio #haas #design #tools #machine #shopfloor #machinistlife #machinist #metalwork #mechanic #metalworking #cncporn #lathechuck #boringbar #mazatrol #haas #haascnc #sinumerik

photo_libraryFinished up this set of 7075-T6 rear uprights!

Finished up this set of 7075-T6 rear uprights!

play_circle_filledShipping out these beauties... 4FL x 5/8” x 1-1/4” LOC x 6” OAL BALL RADIUS SOLID CARBIDE END MILLS  TiAln COATED

RFQ’s: Luisana@hlpgrinding.com

#socalcarbidecuttingtools  #madeinamerica  #manufacturing  #cnc #cncmachine  #instamachinist  #carbide #carbideendmills #customtooling #aerospacemanufacturing #cuttingtools

Shipping out these beauties... 4FL x 5/8” x 1-1/4” LOC x 6” OAL BALL RADIUS SOLID CARBIDE END MILLS TiAln COATED RFQ’s: Luisana@hlpgrinding.com #socalcarbidecuttingtools #madeinamerica #manufacturing #cnc #cncmachine #instamachinist #carbide #carbideendmills #customtooling #aerospacemanufacturing #cuttingtools

play_circle_filledLatest gen @haas_automation accessory racks- Y U NO have spot for deadblow?

Latest gen @haas_automation accessory racks- Y U NO have spot for deadblow?

Austin making some Precision jaws for the Kurt vises. #surfacegrinding #haasautomation #machinist #instamachinist #tooling

Austin making some Precision jaws for the Kurt vises. #surfacegrinding #haasautomation #machinist #instamachinist #tooling

photo_libraryA one off lead fishing wieght mold that we machined for a local customer. #cnc#fadal#instamachinist#jobshop#machineshop

A one off lead fishing wieght mold that we machined for a local customer. #cnc#fadal#instamachinist#jobshop#machineshop

Now the shop has a #hackysack ... this should improve output...
🤘🤣🤘
#backintown #backtowork #countdown #threatlevelmidnight ✈️😎✈️ #nintendo ⚙️⚙️⚙️
#coding #programming
🤘🤓🤘
#solidworks
⚙️⚙️⚙️ #cncmachining 🎞🎥🎞
#staytuned 
We have a show to produce here people... The journey continues...
Stay #motivated ... it's just business...
🇺🇸🇺🇸🇺🇸 #instamachinist 🇯🇵🇩🇪🇬🇧
💥💥💥💥💥💥💥💥💥💥 #entrepreneurlife #carlifestyle #engineeringlife #startuplife 🇺🇸🇺🇸🇺🇸 #boost #turbo #944turbo #911turbo #twinturbo #300zx #boosted #supercharged #gtr #nsx #supra 🔥🔥🔥
@turboboof #turboboof

Now the shop has a #hackysack ... this should improve output... 🤘🤣🤘 #backintown #backtowork #countdown #threatlevelmidnight ✈️😎✈️ #nintendo ⚙️⚙️⚙️ #coding #programming 🤘🤓🤘 #solidworks ⚙️⚙️⚙️ #cncmachining 🎞🎥🎞 #staytuned We have a show to produce here people... The journey continues... Stay #motivated ... it's just business... 🇺🇸🇺🇸🇺🇸 #instamachinist 🇯🇵🇩🇪🇬🇧 💥💥💥💥💥💥💥💥💥💥 #entrepreneurlife #carlifestyle #engineeringlife #startuplife 🇺🇸🇺🇸🇺🇸 #boost #turbo #944turbo #911turbo #twinturbo #300zx #boosted #supercharged #gtr #nsx #supra 🔥🔥🔥 @turboboof #turboboof

play_circle_filledSushimaschine 🍣🥢. / Sushi making machine 🍣🥢.
-
Via: @mechrec
———————————————————-
You want to see more interesting videos
and pictures about engineering like this?
Join the engineering community, follow
@maschinenbaude and you will see a
new post about your passion everyday.
We are looking forward to see you! 💪🏼⚙️
———————————————————
🔗 All rights and credits reserved to the
respective owner(s).
———————————————————
#maschinenbau #mechanicalengineering
#engineering #manufacturing #metalwork
#innovation #turbine  #machinist #bionic
#engineer #machining #engine #invention
#forging #milling #instamachinist #gears
#assembly #schrauben #cnc #engineers
• #cncmachining #automation #turning •
🔧  #engineeringlife #maintenance 🔧
⚙️⚙️⚙️ #maschinenbaude ⚙️⚙️⚙️

Sushimaschine 🍣🥢. / Sushi making machine 🍣🥢. - Via: @mechrec ———————————————————- You want to see more interesting videos and pictures about engineering like this? Join the engineering community, follow @maschinenbaude and you will see a new post about your passion everyday. We are looking forward to see you! 💪🏼⚙️ ——————————————————— 🔗 All rights and credits reserved to the respective owner(s). ——————————————————— #maschinenbau #mechanicalengineering #engineering #manufacturing #metalwork #innovation #turbine #machinist #bionic #engineer #machining #engine #invention #forging #milling #instamachinist #gears #assembly #schrauben #cnc #engineers#cncmachining #automation #turning • 🔧 #engineeringlife #maintenance 🔧 ⚙️⚙️⚙️ #maschinenbaude ⚙️⚙️⚙️

Put the lathe stand together and realized that most of the rigidity comes from the lathe bed itself when bolted to the stand. The stand itself is flimsy because the existing supports were poorly fitted and offered minimal support. I removed the existing bottom support rods and replaced them with new threaded stainless steel rods. Also drilled holes to add two more support rods at the top. I changed the configuration of the back cross braces. This allowed me to tension the four support rods to square up the stand and lock it in place before bolting the cross braces and work surfaces in place. Stand is now rigid and ready to mount the lathe bed.

#lathe #lathes #machining #southbendlathe #machineshop #americanmade #workshop #engineering #machinist #metalturning #hobbymachinist #tools #tooling #betweencenters #learning #machinetools #machinisttools #instamachinist #startingout #newmachinist #rebuild #repair #revamp #service #machinerebuilding #diy

Put the lathe stand together and realized that most of the rigidity comes from the lathe bed itself when bolted to the stand. The stand itself is flimsy because the existing supports were poorly fitted and offered minimal support. I removed the existing bottom support rods and replaced them with new threaded stainless steel rods. Also drilled holes to add two more support rods at the top. I changed the configuration of the back cross braces. This allowed me to tension the four support rods to square up the stand and lock it in place before bolting the cross braces and work surfaces in place. Stand is now rigid and ready to mount the lathe bed. #lathe #lathes #machining #southbendlathe #machineshop #americanmade #workshop #engineering #machinist #metalturning #hobbymachinist #tools #tooling #betweencenters #learning #machinetools #machinisttools #instamachinist #startingout #newmachinist #rebuild #repair #revamp #service #machinerebuilding #diy

Hobbing and broaching a brass gear on our LB3000 EX II “Affordable Excellence” horizontal lathe. You can see this machine and part at our Summer Showcase. Join us and register today! (Link in bio) https://site.okuma.com/summer-showcase #cnc #mfg #openpossibilities #lathes #instamachinist #machinetools #engineers #broaching #hobbing

Hobbing and broaching a brass gear on our LB3000 EX II “Affordable Excellence” horizontal lathe. You can see this machine and part at our Summer Showcase. Join us and register today! (Link in bio) https://site.okuma.com/summer-showcase #cnc #mfg #openpossibilities #lathes #instamachinist #machinetools #engineers #broaching #hobbing

photo_libraryOn a technical scale, twisted necks are one of the trickiest things for me to make by hand. On a machinist scale, nailing down surface finishes on a specific material over time is very involved. Not to mention how difficult it can be to get inlays of organic material to fit in metal. As far as finishes go, this might be the most time I have ever spent on one putter. Hand stamping evenly and having consistent letter depth can be super tricky and takes so many hours of practice it's not even funny. Running weld beads on a part you've invested countless hours in might be the most nerve racking state of mind to be in to try and not let your hand slip or wobble. Having experience over time with a literal bin of scrapped parts is all that can make you better. I can say from first hand experience, I know probably a 1000 ways of how not to make a putter. I try and learn and get better with every single piece I make. I want the next part I make to always be a learning opportunity for me to get better. After all of that is said and done, I offically give you the 3rd iteration in my personal Signature Series. As an homage to the first I have revisited pearl with an intense variation I couldn't be more pleased with. #signatureseries#olsonmfg

On a technical scale, twisted necks are one of the trickiest things for me to make by hand. On a machinist scale, nailing down surface finishes on a specific material over time is very involved. Not to mention how difficult it can be to get inlays of organic material to fit in metal. As far as finishes go, this might be the most time I have ever spent on one putter. Hand stamping evenly and having consistent letter depth can be super tricky and takes so many hours of practice it's not even funny. Running weld beads on a part you've invested countless hours in might be the most nerve racking state of mind to be in to try and not let your hand slip or wobble. Having experience over time with a literal bin of scrapped parts is all that can make you better. I can say from first hand experience, I know probably a 1000 ways of how not to make a putter. I try and learn and get better with every single piece I make. I want the next part I make to always be a learning opportunity for me to get better. After all of that is said and done, I offically give you the 3rd iteration in my personal Signature Series. As an homage to the first I have revisited pearl with an intense variation I couldn't be more pleased with. #signatureseries#olsonmfg

photo_libraryThe clock is ticking on the Bantam Tools Micro-Machining Challenge—there are only TWO WEEKS LEFT! For those who’re already taking on the challenge: Keep calm and mill on. For those still thinking about it: Get on it! ⏰⏰ Reminder: Using a CNC mill, machine a design of your choice that’s no larger than a 1” cube. The only additional requirement is that you must incorporate the Bantam Tools rooster in some shape or form 😉

#bantamtools #btmicrochallenge #micromachining #contests #cncmachining #cnc #desktopcnc #cnclife #instamachinist #makersgonnamake #desktopcnc #cncmachined

The clock is ticking on the Bantam Tools Micro-Machining Challenge—there are only TWO WEEKS LEFT! For those who’re already taking on the challenge: Keep calm and mill on. For those still thinking about it: Get on it! ⏰⏰ Reminder: Using a CNC mill, machine a design of your choice that’s no larger than a 1” cube. The only additional requirement is that you must incorporate the Bantam Tools rooster in some shape or form 😉 #bantamtools #btmicrochallenge #micromachining #contests #cncmachining #cnc #desktopcnc #cnclife #instamachinist #makersgonnamake #desktopcnc #cncmachined

play_circle_filledTired of hand-stamping your details? Check out the KwikMark KM‐64, a bench-top dot peen marker that marks hardened steel & delicate plastics (on round parts, too). http://bit.ly/KwikMark
.
#kwikmark #peenmark #pinstamp #minenotyours #metalworking #machinists #instamachinist #engrave

Tired of hand-stamping your details? Check out the KwikMark KM‐64, a bench-top dot peen marker that marks hardened steel & delicate plastics (on round parts, too). http://bit.ly/KwikMark . #kwikmark #peenmark #pinstamp #minenotyours #metalworking #machinists #instamachinist #engrave

I will be offering the same color choices as the #dfmsmallsquares for the #smallspeedsquare in my PRESALE including BLUE! 
Just remember, if you want anything other than blue, it must be done in the Presale. Afterward it’ll be all Blue for everyone else!

If you want a discount code when the presale starts, please sign up in my bio link!! #woodworkingtools #woodworkersofig #handtoolsonly #instamachinist #woodworkers #woodworking #woodworkersofig #madeformakers #madeinusa🇺🇸 #mfgd2c #mfgentreprenuer #mfgjobs

I will be offering the same color choices as the #dfmsmallsquares for the #smallspeedsquare in my PRESALE including BLUE! Just remember, if you want anything other than blue, it must be done in the Presale. Afterward it’ll be all Blue for everyone else! If you want a discount code when the presale starts, please sign up in my bio link!! #woodworkingtools #woodworkersofig #handtoolsonly #instamachinist #woodworkers #woodworking #woodworkersofig #madeformakers #madeinusa🇺🇸 #mfgd2c #mfgentreprenuer #mfgjobs

play_circle_filledSo I did my first EDM part start to finish today and it turned out not to bad for my first time. Defiantly learned a lot and can for sure shorten up the time next time. The shape is a 13 degree angle with a .012 radius on the bottom with a .015 straight on the top that comes out to .760
#instamachinist #carbide #toolmaker #apprenticetoolmaker #machinist #machining #manualmachinist #jobshop

So I did my first EDM part start to finish today and it turned out not to bad for my first time. Defiantly learned a lot and can for sure shorten up the time next time. The shape is a 13 degree angle with a .012 radius on the bottom with a .015 straight on the top that comes out to .760 #instamachinist #carbide #toolmaker #apprenticetoolmaker #machinist #machining #manualmachinist #jobshop

It’s time to get down like a __ _.
Fill in blank with a comment below.
#instamachinist

It’s time to get down like a __ _. Fill in blank with a comment below. #instamachinist

play_circle_filledThe bushings are pressed into a stainless steel pipe to create a corrosion free roller for a fishing boat.
•
•
•
#manualmachining #manualmachinist #shoplife #machineshoplife #instamachinist #stainlesssteel #uhmw #antigonish #novascotia

The bushings are pressed into a stainless steel pipe to create a corrosion free roller for a fishing boat. • • • #manualmachining #manualmachinist #shoplife #machineshoplife #instamachinist #stainlesssteel #uhmw #antigonish #novascotia

Titan Gilroy of Titans of CNC Academy puts the Tormach 770M to the test by machining a part out of aerospace material. Check it out to see how the 770M endures.⠀
#titans_of_cnc_academy, #Tormach, #instamachinist, #makingchips, #cnc, #cncmachining

Titan Gilroy of Titans of CNC Academy puts the Tormach 770M to the test by machining a part out of aerospace material. Check it out to see how the 770M endures.⠀ #titans_of_cnc_academy, #Tormach, #instamachinist, #makingchips, #cnc, #cncmachining

If we could just machine copper ALL the time .... 🧡🤤😍

If we could just machine copper ALL the time .... 🧡🤤😍

#Repost @espritcam with @get_repost
・・・
#ESPRITcam provides all the toolpath options one needs for #5axis ! Contact us today if you're stepping into 5-axis machining, or plan to in the future. Machined on an Okuma GENOS M460V-5AX @okumaamerica @schunk_hq
.
.
.
#cnc #cncmilling #instamachinist #cncmachining #machineshop #machinist #kurtvise #schunk #manufacturing #indycar #carporn #racecar #jobshop #okuma #genos #m460v5ax

#Repost @espritcam with @get_repost ・・・ #ESPRITcam provides all the toolpath options one needs for #5axis ! Contact us today if you're stepping into 5-axis machining, or plan to in the future. Machined on an Okuma GENOS M460V-5AX @okumaamerica @schunk_hq . . . #cnc #cncmilling #instamachinist #cncmachining #machineshop #machinist #kurtvise #schunk #manufacturing #indycar #carporn #racecar #jobshop #okuma #genos #m460v5ax

play_circle_filledGetting better everyday with the 5 axis. Can’t show the parts. @5thaxis @dmgmori @hypermill  #cnc #cncmachining #cncmachine #cncmachinist #instamachinist

Getting better everyday with the 5 axis. Can’t show the parts. @5thaxis @dmgmori @hypermill #cnc #cncmachining #cncmachine #cncmachinist #instamachinist

photo_libraryReamers large and small, we do them all. Steps, tapers and more. What kinds of sizes do you use that aren't standard?

Reamers large and small, we do them all. Steps, tapers and more. What kinds of sizes do you use that aren't standard?

Tool paths for days

Tool paths for days

photo_libraryReposted from @makar_cnc_mill - Making some serious chips with the Seco Tools Square 6 (◀️cuz it has 6 cutting edges, double sided) R220.96 50mm dia. shoulder milling cutter! Thanks for using Seco my friend!

#cncmanufacturing #milling #machinist #machineporn 
#instamachinist #SolidCAM 
#3DiMachining #haas_automation 
#5axis #aluminum #badassmachinists #UMC750 #GARANT #iMachining 
#CAM #CNC #ЧПУ #machining
#5thaxis #haascnc

Reposted from @makar_cnc_mill - Making some serious chips with the Seco Tools Square 6 (◀️cuz it has 6 cutting edges, double sided) R220.96 50mm dia. shoulder milling cutter! Thanks for using Seco my friend! #cncmanufacturing #milling #machinist #machineporn #instamachinist #SolidCAM #3DiMachining #haas_automation #5axis #aluminum #badassmachinists #UMC750 #GARANT #iMachining #CAM #CNC #ЧПУ #machining #5thaxis #haascnc

play_circle_filledThe team works master prides itself on..! ————————————————————22.15 prşvia @toolingmg  thank you ————————————————————Follow ...❗️ @turkish.com.tr ❗️
・・・
Oddly satisfying
.
All rights and credit reserved to respective owner (s) ————————————————————-#worldofengineering#mechanicalengineering#technology#industrial#machining#metalwork#innovation#invention#pruduction#manufacturing#process#instamachinist#machinists#forging#milling#turning#cnc#cncmachining#automation#turbine#torque#gears#assembly#design#satisfying#oddlysatisfying#ewesome#amazing#processvideo

The team works master prides itself on..! ————————————————————22.15 prşvia @toolingmg thank you ————————————————————Follow ...❗️ @turkish.com.tr ❗️ ・・・ Oddly satisfying . All rights and credit reserved to respective owner (s) ————————————————————-#worldofengineering#mechanicalengineering#technology#industrial#machining#metalwork#innovation#invention#pruduction#manufacturing#process#instamachinist#machinists#forging#milling#turning#cnc#cncmachining#automation#turbine#torque#gears#assembly#design#satisfying#oddlysatisfying#ewesome#amazing#processvideo

photo_libraryA video of my morning. From programming, to saw cutting, to set up, to running a finished part. #vanguard #instamachinist #cnc #mastercam #fadal

A video of my morning. From programming, to saw cutting, to set up, to running a finished part. #vanguard #instamachinist #cnc #mastercam #fadal

Fixing up a temporary jig into something that deserves a permanent home in my shop. #instamachinist #toolmaking #toolmakingcompetiton2019

Fixing up a temporary jig into something that deserves a permanent home in my shop. #instamachinist #toolmaking #toolmakingcompetiton2019

Shots of the interior, resonator and control station in the CL-5. Vintage 90s. #tbt

Shots of the interior, resonator and control station in the CL-5. Vintage 90s. #tbt

Check out Frank in the process of CNC blueprinting this 12v Cummins block! Give us a call for your next build. 
#djprecisionmachine #pioneering #MadeInUSA #instamachinist #dieselperformance #cummins #strictlycummins #cumminsnation #cnc

Check out Frank in the process of CNC blueprinting this 12v Cummins block! Give us a call for your next build. #djprecisionmachine #pioneering #MadeInUSA #instamachinist #dieselperformance #cummins #strictlycummins #cumminsnation #cnc

#tbt from 2013 when we made LED light adapters for OE truck and SUV applications. We manufactured these for some of the best off-road lighting manufacturers in world.
.
.
#ICIUSA #manufacturing #engineering #design #technology #cnc #engineer #mechanicalengineering #welding #mechanical #fabrication #manufacturer #machine #innovation #metalwork #engineeringlife #industry #steel #instamachinist #construction #industrial #engineers #bhfyp #offroad #ford #jeep #chevy #dodge #toyota

#tbt from 2013 when we made LED light adapters for OE truck and SUV applications. We manufactured these for some of the best off-road lighting manufacturers in world. . . #ICIUSA #manufacturing #engineering #design #technology #cnc #engineer #mechanicalengineering #welding #mechanical #fabrication #manufacturer #machine #innovation #metalwork #engineeringlife #industry #steel #instamachinist #construction #industrial #engineers #bhfyp #offroad #ford #jeep #chevy #dodge #toyota

play_circle_filledQuick skim on this .1875" 6061 aluminum plate.  #instamachinist #MitsubishiAsx

Quick skim on this .1875" 6061 aluminum plate. #instamachinist #MitsubishiAsx

play_circle_filledNicole Checking the Location of a Diameter on a G10 Part.

Nicole Checking the Location of a Diameter on a G10 Part.

photo_library1.5” DIA indexable used for facing nice little tool been running it for 3 years now over 10,000 parts with the same inserts. #machining #endmill #cncmilling #instamachinist #kprecision #kprecisionllc #machinist #machinistlife #machineshop

1.5” DIA indexable used for facing nice little tool been running it for 3 years now over 10,000 parts with the same inserts. #machining #endmill #cncmilling #instamachinist #kprecision #kprecisionllc #machinist #machinistlife #machineshop

photo_libraryMade this Circle cutting jig for my handheld router. 🤓 ⬅️SWIPE➡

Made a search on Youtube for homemade versions of this, found some clever versions but decided that this kind will be sufficient for my needs at the moment

I drilled the holes for the guide bars using our #universalmillingmachine and the digital readout at work - its way too easy drilling precision positioned holes with that. 😚 
Then, with a hole saw, I cutted the inside radius corner, then I used the japanese pull saw to cut through, I finished off the surfaces using a drum sander in the drill press. 
I installed some metal thread inserts for the locking knobs using wood glue. 
I like the trick when installing these using a allen screw with two nuts to get the insert flush. 👍😄 Lastly i rounded all corners with a radius router bit

#woodworking
#woodwork
#tools
#diy 
#builtnotbought 
#instamachinist 
#routerjig
#homeshop 
#instamachinist 
#conventionalmachining
#machining

Made this Circle cutting jig for my handheld router. 🤓 ⬅️SWIPE➡ Made a search on Youtube for homemade versions of this, found some clever versions but decided that this kind will be sufficient for my needs at the moment I drilled the holes for the guide bars using our #universalmillingmachine and the digital readout at work - its way too easy drilling precision positioned holes with that. 😚 Then, with a hole saw, I cutted the inside radius corner, then I used the japanese pull saw to cut through, I finished off the surfaces using a drum sander in the drill press. I installed some metal thread inserts for the locking knobs using wood glue. I like the trick when installing these using a allen screw with two nuts to get the insert flush. 👍😄 Lastly i rounded all corners with a radius router bit #woodworking #woodwork #tools #diy #builtnotbought #instamachinist #routerjig #homeshop #instamachinist #conventionalmachining #machining

Friday at 6pm EST we will be offering 10 spots for semi custom Culprits at $750 shipped, delivery in 2 weeks.
.
Customizing options include anodizing color, backspacer style and pivot disc style.
.
@skiffmadeblades has more information in his posts.
.
Start thinking about what options you want and check us out on Friday.
.
.
.
 #cnc #cncmachining #cncporn #customknifemaker #customknives #framelock #garageshop #instamachinist #knife #knives #knifecommunity #knifemaker #knifemaking #knifenut #knifeporn #knifestagram #knifesupplies #knivesdaily  #machineshop #machining #machiningporn #machinist #machinistlife #skiffmadeblades #usn #usnfollow #usnstagram  #americanmade

Friday at 6pm EST we will be offering 10 spots for semi custom Culprits at $750 shipped, delivery in 2 weeks. . Customizing options include anodizing color, backspacer style and pivot disc style. . @skiffmadeblades has more information in his posts. . Start thinking about what options you want and check us out on Friday. . . . #cnc #cncmachining #cncporn #customknifemaker #customknives #framelock #garageshop #instamachinist #knife #knives #knifecommunity #knifemaker #knifemaking #knifenut #knifeporn #knifestagram #knifesupplies #knivesdaily #machineshop #machining #machiningporn #machinist #machinistlife #skiffmadeblades #usn #usnfollow #usnstagram #americanmade

photo_libraryLove these end mills .5”DIA .09” corner radius always run flawlessly and can push them hard💪💪 #chpeters #machining #endmill #cncmilling #instamachinist #kprecision #kprecisionllc #machinist

Love these end mills .5”DIA .09” corner radius always run flawlessly and can push them hard💪💪 #chpeters #machining #endmill #cncmilling #instamachinist #kprecision #kprecisionllc #machinist

photo_libraryNew batch of parts ready to be tumbled, then shipped to get anodized. #TntToolingInc #InstaMachinist

New batch of parts ready to be tumbled, then shipped to get anodized. #TntToolingInc #InstaMachinist

Check out my amazing welding abilities!  #babbage #steampunk #analyticalengine #instamachinist

Check out my amazing welding abilities! #babbage #steampunk #analyticalengine #instamachinist

Spec of the Week: 6,000. That's the spindle r/min of the DHF 8000 5-axis horizontal machining center.  The geared head nodding spindle delivers over 700 ft-lb of torque. #Aerospace applications? Copy that.

Spec of the Week: 6,000. That's the spindle r/min of the DHF 8000 5-axis horizontal machining center. The geared head nodding spindle delivers over 700 ft-lb of torque. #Aerospace applications? Copy that.

Getting ready to drill some .015" holes thanks to @harveytool !!⠀
.⠀
.⠀
.⠀
.⠀
.⠀
.⠀
#instamachinist #tiny #small #harveytool #drill #stainless #sst #makingchips #awesome #doitforthegram

Getting ready to drill some .015" holes thanks to @harveytool !!⠀ .⠀ .⠀ .⠀ .⠀ .⠀ .⠀ #instamachinist #tiny #small #harveytool #drill #stainless #sst #makingchips #awesome #doitforthegram

photo_libraryHere's something for #tht , I made this a while back. It's a heat sink / back purge cap for welding #vibrantperformance 3 inch v-bands. Then a few weeks later I turned the other end into a heatsink for a #precisionturbo 66mm wastegate v-band. It's 6061 aluminum turned and drilled out the center and tapped for 1/8 npt so it can accept either a pipe plug or a barbed fitting for back purging. It's also perfect for holding the v-band on a welding positioner for that perfect weld.
#6061 #instamachinist #machineshop #machineshoplife #manualmachining  #manualmachinist #argonaddicts #weldeverydamnday #weldaholics #weldlife #weldinglife #titaniumexhaust #titaniumwelding #stainlesssteelexhaust #stainlesswelding #fabrication #fabricationlife #madeinusa #tig #tigwelding #tigweld #tiglife #backpurge #backpurged #metalfab #metalfabrication

Here's something for #tht , I made this a while back. It's a heat sink / back purge cap for welding #vibrantperformance 3 inch v-bands. Then a few weeks later I turned the other end into a heatsink for a #precisionturbo 66mm wastegate v-band. It's 6061 aluminum turned and drilled out the center and tapped for 1/8 npt so it can accept either a pipe plug or a barbed fitting for back purging. It's also perfect for holding the v-band on a welding positioner for that perfect weld. #6061 #instamachinist #machineshop #machineshoplife #manualmachining #manualmachinist #argonaddicts #weldeverydamnday #weldaholics #weldlife #weldinglife #titaniumexhaust #titaniumwelding #stainlesssteelexhaust #stainlesswelding #fabrication #fabricationlife #madeinusa #tig #tigwelding #tigweld #tiglife #backpurge #backpurged #metalfab #metalfabrication

photo_libraryWin it! 
E O Partridge No. 3 vintage grinder.

Closest guess on the hammer price of Lot 44 
takes the grinder.  Shipping included continental US.

June 25th auction in Concord, NC

Let's see who's got some appraisal skills! 
First and closest guess, IG only, place guess in the comments. 
Lot 44: Jet 1440-3PGH heavy duty tool room lathe. 
#auction # blacksmith #vintagemachinery #machinist #lathe #grinding #Grinder #instamachinist #industrial 
#ironworker #fabrication #machineshop #appraisal #win #oldtools

Win it! E O Partridge No. 3 vintage grinder. Closest guess on the hammer price of Lot 44 takes the grinder. Shipping included continental US. June 25th auction in Concord, NC Let's see who's got some appraisal skills! First and closest guess, IG only, place guess in the comments. Lot 44: Jet 1440-3PGH heavy duty tool room lathe. #auction # blacksmith #vintagemachinery #machinist #lathe #grinding #Grinder #instamachinist #industrial #ironworker #fabrication #machineshop #appraisal #win #oldtools

This block of 6061 is wayyy too big for the little jet, but this thing cuts so straight there's no variation at all when we flip and bump it to the stop. 
#cncmachining #cnc #cncmachinist #instamachinist

This block of 6061 is wayyy too big for the little jet, but this thing cuts so straight there's no variation at all when we flip and bump it to the stop. #cncmachining #cnc #cncmachinist #instamachinist

photo_libraryWorking on a Stallion Tombstone as well as a Stallion Double Sided today!

Stop Handling, Start Machining.

Working on a Stallion Tombstone as well as a Stallion Double Sided today! Stop Handling, Start Machining.

play_circle_filledSu jeti çok yüksek basınçlı su ve aşındırıcı madde karışımı kullanılarak çeşitli malzemeleri kesme kapasitesi olan endüstriyel bir araçtır..!————————————————————20.30 prşvia  @latestconceptsinc thanks————————————————————Follow ....❗️ @turkish.com.tr ❗️
・・・
Oddly satisfying
.
All rights and credit reserved to respective owner (s) ————————————————————#waterjet #waterjetcutting #styrofoam #steelwork #workholding #manufacturing #howitsdone #lasercutter #metalcutting #machinist #sheetmetal #metalworking #mechanicwork  #techworld  #welding #manualmachinist #industrial #metalwork #instamachinist #production #fabricator #robotdesign #machineworks #machinery #machinist#automation#innovation #design #robotics#satisfyingvideos#processvideo

Su jeti çok yüksek basınçlı su ve aşındırıcı madde karışımı kullanılarak çeşitli malzemeleri kesme kapasitesi olan endüstriyel bir araçtır..!————————————————————20.30 prşvia @latestconceptsinc thanks————————————————————Follow ....❗️ @turkish.com.tr ❗️ ・・・ Oddly satisfying . All rights and credit reserved to respective owner (s) ————————————————————#waterjet #waterjetcutting #styrofoam #steelwork #workholding #manufacturing #howitsdone #lasercutter #metalcutting #machinist #sheetmetal #metalworking #mechanicwork #techworld #welding #manualmachinist #industrial #metalwork #instamachinist #production #fabricator #robotdesign #machineworks #machinery #machinist#automation#innovation #design #robotics#satisfyingvideos#processvideo

photo_libraryDay 20 of the @machinist_therapy_hotline photo never ending month is show your control or something more competitive of a hashtag but I digress. I like my newest control because with the addition of the robot it has a very intuitive screen which allows me to know the layout of the blanks to be sure that it matches what is in the actual pallet. I know or think that they all do that but I still think it’s cool.

Day 20 of the @machinist_therapy_hotline photo never ending month is show your control or something more competitive of a hashtag but I digress. I like my newest control because with the addition of the robot it has a very intuitive screen which allows me to know the layout of the blanks to be sure that it matches what is in the actual pallet. I know or think that they all do that but I still think it’s cool.

Small surface microphone I've got wiht the Hauser. I have no idea how useful it's going to be. I think the only time I have seen someone use one was in a post by @adam_the_machinist. If anyone has any tips or tricks to using it / creative uses I'd be happy to know about them 😁
#hauser #instamachinist #tool

Small surface microphone I've got wiht the Hauser. I have no idea how useful it's going to be. I think the only time I have seen someone use one was in a post by @adam_the_machinist. If anyone has any tips or tricks to using it / creative uses I'd be happy to know about them 😁 #hauser #instamachinist #tool

play_circle_filledFinally finished up my 4th axis for the #tormach I have a fee details to tend to but it is functional. Video is live on YouTube and my website. I include a bom for those interested in doing similar. #instamachinist #shoplife #diy #shop

Finally finished up my 4th axis for the #tormach I have a fee details to tend to but it is functional. Video is live on YouTube and my website. I include a bom for those interested in doing similar. #instamachinist #shoplife #diy #shop

photo_libraryThrowback to us getting our Robodrill! Finally got to repost this. Huge shoutout to the #instamachinist community: @frelux sending us an awesome guide on tool/work offsets, @bwaredesignmfg and @motisinc for helping us with Parameters, Setup, Connectivity and Fusion Post Processor!  @fanucamerica has been great to work with so far. Loving the AMP from @americanrotary and compressor from @californiaairtools_ Next step: getting our 4th axis setup 🤘🏼 #teamwork #robodrill #fusion360 #fanuc

Throwback to us getting our Robodrill! Finally got to repost this. Huge shoutout to the #instamachinist community: @frelux sending us an awesome guide on tool/work offsets, @bwaredesignmfg and @motisinc for helping us with Parameters, Setup, Connectivity and Fusion Post Processor! @fanucamerica has been great to work with so far. Loving the AMP from @americanrotary and compressor from @californiaairtools_ Next step: getting our 4th axis setup 🤘🏼 #teamwork #robodrill #fusion360 #fanuc

play_circle_filledVegan pig? Invite me to your next BBQ @methods_machinetools! #robodrill

Vegan pig? Invite me to your next BBQ @methods_machinetools! #robodrill

Just made some stainless steel pulleys. .
 #cncmachining #lathe #haascnc #instamachinist #stainlesssteel #pulley

Just made some stainless steel pulleys. . #cncmachining #lathe #haascnc #instamachinist #stainlesssteel #pulley

photo_libraryMore pictures from yesterday’s mayham. Part never took flight. It ripped out the soft jaws, got stuck on the 1/2” @destinytool diamondback, spun like a Lang fan, and then the machine alarmed out due to spindle being unbalanced. Happy to report that today is a new day and they are now running perfectly. .
.
.
.
.
#cnc #machining #cncmill #cnclathe #milling #machineporn #toolporn #destinytool #rpmcorp #cncshop #machineshop #machinist #starrett #damit #instamachinist #manufacturing #engineering #mechanicalengineering #maritool #haas #haascnc #haasautomation #destinytool #freshchipsdaily #qualichem #renishaw #ohshit #workflow

More pictures from yesterday’s mayham. Part never took flight. It ripped out the soft jaws, got stuck on the 1/2” @destinytool diamondback, spun like a Lang fan, and then the machine alarmed out due to spindle being unbalanced. Happy to report that today is a new day and they are now running perfectly. . . . . . #cnc #machining #cncmill #cnclathe #milling #machineporn #toolporn #destinytool #rpmcorp #cncshop #machineshop #machinist #starrett #damit #instamachinist #manufacturing #engineering #mechanicalengineering #maritool #haas #haascnc #haasautomation #destinytool #freshchipsdaily #qualichem #renishaw #ohshit #workflow

photo_libraryLatest truck in all it's glory before it goes to war and will never be the same. Can't say that I'm sad to see it go though 👋 kicked me and @pschady 's ass, honestly I hope the new owner beats the shit out of it. .
.
#robotekUSA
#shesacutter #trenchless
#pipeline #pipelinetools #pipepig #cipp #pipecutting #pipecutter #trenchlesstechnology  #undergroundconstruction #customtools #pipeinspection #inspectionrobotics #pipelining #fabrication #instawelder #instamachinist #ciarobotthatsneaksintoyourhousethroughyourshittertogiveyouadirtysanchezandhideyourcarkeys

Latest truck in all it's glory before it goes to war and will never be the same. Can't say that I'm sad to see it go though 👋 kicked me and @pschady 's ass, honestly I hope the new owner beats the shit out of it. . . #robotekUSA #shesacutter #trenchless #pipeline #pipelinetools #pipepig #cipp #pipecutting #pipecutter #trenchlesstechnology #undergroundconstruction #customtools #pipeinspection #inspectionrobotics #pipelining #fabrication #instawelder #instamachinist #ciarobotthatsneaksintoyourhousethroughyourshittertogiveyouadirtysanchezandhideyourcarkeys

photo_libraryNow that's a chip! Like a tiny ice cream cone. Nothing like raw power! I might have gotten carried away #cnc #instamachinist #chips #machining #2.2kw

Now that's a chip! Like a tiny ice cream cone. Nothing like raw power! I might have gotten carried away #cnc #instamachinist #chips #machining #2.2kw

Oh yeah I forgot I ordered a uh. I can't read Chinese.

Thanks @sainsmart  for he replacement Y motor for my cr-10. Turns out that moving a hefty bed constantly wears out the stepper driving it and the tension wears out the bearings. Rotate your stepper drivers every few months to keep the bearings fresh and the belts pulling in a different direction.

#Bradyhooverdesigns

Oh yeah I forgot I ordered a uh. I can't read Chinese. Thanks @sainsmart for he replacement Y motor for my cr-10. Turns out that moving a hefty bed constantly wears out the stepper driving it and the tension wears out the bearings. Rotate your stepper drivers every few months to keep the bearings fresh and the belts pulling in a different direction. #Bradyhooverdesigns

photo_libraryMilling a 3/8 key way all the way down this shaft. Had to do it in two setups didn’t have enough travel on the mill. #machining #okotoks #machinistlife #jobshop #instamachinist #machinist #shoplife

Milling a 3/8 key way all the way down this shaft. Had to do it in two setups didn’t have enough travel on the mill. #machining #okotoks #machinistlife #jobshop #instamachinist #machinist #shoplife

@davidlragan and @team_frm are throwing it back this weekend to the chrome car @nascaronfox's Darrell Waltrip drove in 1997, in tribute to his 19 years of broadcasting. Darrell retires after Fox's final broadcast of the 2019 @nascar Cup season (at @racesonoma).
.
#ThanksDW | #Race50noma
.
.
.
.
.
.
.
.
.
#DavidRagan #FrontRowMotorsports #MENCS #FordMustang #Ford #FordPerformance #Mustang #Racing #Machinist #Technician #Engineer #Manufacturing #Machining #InstaMachinist #CNCMachining #CNC #MotorSports #AutoSports #AutoRacing #MotorRacing #Engines #EngineBuilding #Engine

@davidlragan and @team_frm are throwing it back this weekend to the chrome car @nascaronfox's Darrell Waltrip drove in 1997, in tribute to his 19 years of broadcasting. Darrell retires after Fox's final broadcast of the 2019 @nascar Cup season (at @racesonoma). . #ThanksDW | #Race50noma . . . . . . . . . #DavidRagan #FrontRowMotorsports #MENCS #FordMustang #Ford #FordPerformance #Mustang #Racing #Machinist #Technician #Engineer #Manufacturing #Machining #InstaMachinist #CNCMachining #CNC #MotorSports #AutoSports #AutoRacing #MotorRacing #Engines #EngineBuilding #Engine

@machinist_therapy_hotline just wanted to show my non Kennedy tool box. There is a wooden Gerstner on top if that counts but like what @harryboomer said it's not the box that makes the machinist!! Lol #machinist #machinistpodcast
#instamachinist

@machinist_therapy_hotline just wanted to show my non Kennedy tool box. There is a wooden Gerstner on top if that counts but like what @harryboomer said it's not the box that makes the machinist!! Lol #machinist #machinistpodcast #instamachinist

Day 20 @machinist_therapy_hotline . My controller is better than yours..... is Organic 😁.
.

#instamachinist #haascnc #machinistlife #mth2019

Day 20 @machinist_therapy_hotline . My controller is better than yours..... is Organic 😁. . #instamachinist #haascnc #machinistlife #mth2019

Made some simple little fixtures for the rotary today. Sure is nice making parts in aluminum for a change 😁 #instamachinist #machining #cnc #manufacturing

Made some simple little fixtures for the rotary today. Sure is nice making parts in aluminum for a change 😁 #instamachinist #machining #cnc #manufacturing

play_circle_filledTeknoloji dünyası ilerledikçe metal endüstri sektöründe ROBOTİCS sistemler yaygınlaşıyor..!————————————————————19.20 prşvia @trumpfinc thanks————————————————————Follow ....❗️ @turkish.com.tr ❗️ Follow ....❗️ @turkish.com.tr ❗️ Follow ....❗️ @turkish.com.tr ❗️
・・・
Oddly satisfying
.
All rights and credit reserved to respective owner (s) ————————————————————#steelwork #workholding #manufacturing #howitsdone #lasercutter #metalcutting #machinist #sheetmetal #metalworking #mechanicwork  #techworld  #welding #manualmachinist #industrial #metalwork #instamachinist #production #fabricator #robotdesign #machineworks #machinery #machinist#automation#innovation #design #robotics#satisfyingvideos#processvideo

Teknoloji dünyası ilerledikçe metal endüstri sektöründe ROBOTİCS sistemler yaygınlaşıyor..!————————————————————19.20 prşvia @trumpfinc thanks————————————————————Follow ....❗️ @turkish.com.tr ❗️ Follow ....❗️ @turkish.com.tr ❗️ Follow ....❗️ @turkish.com.tr ❗️ ・・・ Oddly satisfying . All rights and credit reserved to respective owner (s) ————————————————————#steelwork #workholding #manufacturing #howitsdone #lasercutter #metalcutting #machinist #sheetmetal #metalworking #mechanicwork #techworld #welding #manualmachinist #industrial #metalwork #instamachinist #production #fabricator #robotdesign #machineworks #machinery #machinist#automation#innovation #design #robotics#satisfyingvideos#processvideo

play_circle_filledThank you for all the birthday wishes... from the Dominican Republic.

Thank you for all the birthday wishes... from the Dominican Republic.

#mth2019 
@machinist_therapy_hotline 
Day 20 “ My controller is better”
Hey Folks ! Without further adieu I present the Okuma control of the future! THE JODUS 5020!  I know a lot of you machinist think your the shit with your fancy futuristic touch screens ... but let me tell you about this completely “ conversational “ 
control. He is ten times smarter than Siri and way better looking than Alexa! You can select his language that you wish to talk in and even his accent. He currently has a funny one going on right now. You can also style his hair the way you like. I currently have it set on “ messy maintenance guy” 😉 Once you and the Jodus 5020 have your parts running perfect you can have yourselves a yarn during cycle time 🤗
#instamachinist #shoplife #machinistlife #okumacnc #okumaamerica

#mth2019 @machinist_therapy_hotline Day 20 “ My controller is better” Hey Folks ! Without further adieu I present the Okuma control of the future! THE JODUS 5020! I know a lot of you machinist think your the shit with your fancy futuristic touch screens ... but let me tell you about this completely “ conversational “ control. He is ten times smarter than Siri and way better looking than Alexa! You can select his language that you wish to talk in and even his accent. He currently has a funny one going on right now. You can also style his hair the way you like. I currently have it set on “ messy maintenance guy” 😉 Once you and the Jodus 5020 have your parts running perfect you can have yourselves a yarn during cycle time 🤗 #instamachinist #shoplife #machinistlife #okumacnc #okumaamerica

photo_libraryMATC's "Nuts, Bolts and Thingamajigs" has started today. If you're looking to learn more about cnc machining or swiss, stop by the Milwaukee Area Technical College for a first hand look at their program and Tsugami Swiss machines. #ESPRITcam @tsugami_remsales @morrisgroupinc
.
.
.
#cnc #manufacturing #matc #machinist #cnctraining #machineshop #cncmill #cnclathe #swissmachine #matc #tsugami #machining #instamachinist #morris #okuma

MATC's "Nuts, Bolts and Thingamajigs" has started today. If you're looking to learn more about cnc machining or swiss, stop by the Milwaukee Area Technical College for a first hand look at their program and Tsugami Swiss machines. #ESPRITcam @tsugami_remsales @morrisgroupinc . . . #cnc #manufacturing #matc #machinist #cnctraining #machineshop #cncmill #cnclathe #swissmachine #matc #tsugami #machining #instamachinist #morris #okuma

photo_libraryFinally got out first batch done for anodizing @am_metal_finishing . Can't wait to see them finished! And thanks  to @jamesc_19 for lending a hand to get em done. 💪🌮
. . . . . . 
#dominoes #domino #haas #haascnc #cnc #machining #cncmachining #cncmachine #manufacturing #instamachinist #machinist  #machineshop #metalwork #machine #fabrication  #shoplife

Finally got out first batch done for anodizing @am_metal_finishing . Can't wait to see them finished! And thanks to @jamesc_19 for lending a hand to get em done. 💪🌮 . . . . . . #dominoes #domino #haas #haascnc #cnc #machining #cncmachining #cncmachine #manufacturing #instamachinist #machinist #machineshop #metalwork #machine #fabrication #shoplife

Some simple brackets; quick blend, counter sink, airgun and buff. Then out the 🚪 💯

Some simple brackets; quick blend, counter sink, airgun and buff. Then out the 🚪 💯

Our customer came to us with a wood model of a seatbelt bracket for a custom 1960 Mercedes-Benz Cabriolet. We took this and designed a 3D model in SolidWorks. Working in our Haas VF-2, we’ve produced 11 left and right molds out of 6061 Aluminum. #madeinusa

Our customer came to us with a wood model of a seatbelt bracket for a custom 1960 Mercedes-Benz Cabriolet. We took this and designed a 3D model in SolidWorks. Working in our Haas VF-2, we’ve produced 11 left and right molds out of 6061 Aluminum. #madeinusa

play_circle_filledDay 20: My controller is better. Mazak Smooth X makes mid starts a breeze. Select the N line you want to start at and it scans the program for G and M codes up to that line. #MTH2019 #machinisttherapyhotline #instamachinist

Day 20: My controller is better. Mazak Smooth X makes mid starts a breeze. Select the N line you want to start at and it scans the program for G and M codes up to that line. #MTH2019 #machinisttherapyhotline #instamachinist

play_circle_filledAt Nova High School, classes go beyond reading about Engineering in textbooks; these students are learning how to operate Levil’s LMV-F400 machine everyday! ⚙️ This is the future of Engineering! #leviltechnology #cncmachines #cncforeducation #engineering #handsonlearning #novahighschool #fanuc #millingmachine #bestcncmachine #madeinusa

At Nova High School, classes go beyond reading about Engineering in textbooks; these students are learning how to operate Levil’s LMV-F400 machine everyday! ⚙️ This is the future of Engineering! #leviltechnology #cncmachines #cncforeducation #engineering #handsonlearning #novahighschool #fanuc #millingmachine #bestcncmachine #madeinusa

Uddeholm Balder. You know it's some quality steel when its named after gods from the norse mythology😉👍
-
-
#igchipoftheweek #instamachinist

Uddeholm Balder. You know it's some quality steel when its named after gods from the norse mythology😉👍 - - #igchipoftheweek #instamachinist

play_circle_filledNow further customize your MachineBuilder experience with our newly updated Design Settings menu. Enjoy a variety of new and improved options that allow for a personalized build process. See for yourself!
•
•
•
•
•
#vention #automation #cad #caddesign #designengineer #engineering #engineeringlife #industrialautomation #industrialdesign #industrialengineer #industryengineering #machinedesign #machining #manufacturing #manufacturingengineering #mechanicalengineer #digitalmanufacturingdesign #engineeringdesign #instamachinist #machinist #worldofengineering #3ddesign

Now further customize your MachineBuilder experience with our newly updated Design Settings menu. Enjoy a variety of new and improved options that allow for a personalized build process. See for yourself! • • • • • #vention #automation #cad #caddesign #designengineer #engineering #engineeringlife #industrialautomation #industrialdesign #industrialengineer #industryengineering #machinedesign #machining #manufacturing #manufacturingengineering #mechanicalengineer #digitalmanufacturingdesign #engineeringdesign #instamachinist #machinist #worldofengineering #3ddesign

#instamachinist stories highlights, photos and videos hashtag on Instagram

Can someone know if you are stalking their Instagram profile?

-There are a bunch of apps that allow you to do that.Most of them are paid which shows a bunch of people that visited your profile lately and to unlock the other bunch you will have to pay. -However lately i was really lucky i found one app that you can view basically everyone that entered your profile and checked anything about your profile,basically all you have to do is watch a add which is like 3 seconds long,it’s called InstaViewer. -Basically people would need to dig in deeply to be able to find an app that allows them to see who stalks their profile. However to be perfectly correct if they can or not.Yes they can but most of them don’t care or ignore it completely. I rarely use it because of the high follower number.Only on special circumstances.Can’t keep a track on all of them.


Is there any app for Instagram to check stalkers?

Yes. There are many applications to check who views your profile on your Instagram. “IG Analyzer” is one of those apps. However, to use any of those applications you’ll have to pay. I’d rather suggest you switch to a business profile so you get an idea of how many people view your profile and how many people you can reach.

Yes there is one ; "Who viewed my insta”,there are some premier contents but free version works fine though

You can use social rank for free to find your stalkers (and much more) for free. SocialRank, as described on their website, is “The easiest way to identify, organize, and manage your audience on Twitter and Instagram.” It works by pulling all your following and followers on either Instagram and Twitter and provides you an easy to use web-interface to split and segment the information as you wish. The data is incredibly detailed and lists each follower in a table form. The tool provides the name and username of your followers, the total number of followers they currently have, the average likes/comments they receive on their posts, and their engagement rates.


Who blocked you on Instagram?

What happened to insta-stalker.com website?

  1. Open the Instagram App and click the Search Button

  2. Search for the culprit’s username. If it shows up, you’re not blocked.  If it doesn’t, continue with Step 3.

  3. Go to a mutual friend’s Instagram. (The closer they are with the suspect, the better.)

  4. Go through their posts, likes, comments, and followers to see if the suspect’s username appears.

  5. If the user’s name appears, click on it.

  6. If you click on the user’s profile and are unable to see their content, even though at the top of their profile it says they have a number of posts, then they have blocked you.

  7. If the user’s Instagram profile is set to Private, then their name will not appear on the search list; they have either blocked you or deactivated their Instagram account.